Thickness.cs source code in C# .NET

Source code for the .NET framework in C#

                        
Code:

                         / Net / Net / 3.5.50727.3053 / DEVDIV / depot / DevDiv / releases / Orcas / SP / wpf / src / Framework / System / Windows / Thickness.cs / 1 / Thickness.cs
                        

                        
                            //---------------------------------------------------------------------------- 
//
// Copyright (C) Microsoft Corporation.  All rights reserved.
//
// File: Thickness.cs 
//
// Description: Contains the Thickness (double x4) value type. 
// 
// History:
//  06/02/2003 : greglett  - created. 
//
//---------------------------------------------------------------------------

using MS.Internal; 
using System.ComponentModel;
using System.Globalization; 
 
namespace System.Windows
{ 
    /// 
    /// Thickness is a value type used to describe the thickness of frame around a rectangle.
    /// It contains four doubles each corresponding to a side: Left, Top, Right, Bottom.
    ///  
    [TypeConverter(typeof(ThicknessConverter))]
    [Localizability(LocalizationCategory.None, Readability = Readability.Unreadable)] 
    public struct Thickness : IEquatable 
    {
        //------------------------------------------------------------------- 
        //
        //  Constructors
        //
        //------------------------------------------------------------------- 

        #region Constructors 
        ///  
        /// This constructur builds a Thickness with a specified value on every side.
        ///  
        /// The specified uniform length.
        public Thickness(double uniformLength)
        {
            _Left = _Top = _Right = _Bottom = uniformLength; 
        }
 
        ///  
        /// This constructor builds a Thickness with the specified number of pixels on each side.
        ///  
        /// The thickness for the left side.
        /// The thickness for the top side.
        /// The thickness for the right side.
        /// The thickness for the bottom side. 
        public Thickness(double left, double top, double right, double bottom)
        { 
            _Left = left; 
            _Top = top;
            _Right = right; 
            _Bottom = bottom;
        }

 
        #endregion
 
 
        //--------------------------------------------------------------------
        // 
        //  Public Methods
        //
        //-------------------------------------------------------------------
 
        #region Public Methods
 
        ///  
        /// This function compares to the provided object for type and value equality.
        ///  
        /// Object to compare
        /// True if object is a Thickness and all sides of it are equal to this Thickness'.
        public override bool Equals(object obj)
        { 
            if (obj is Thickness)
            { 
                Thickness otherObj = (Thickness)obj; 
                return (this == otherObj);
            } 
            return (false);
        }

        ///  
        /// Compares this instance of Thickness with another instance.
        ///  
        /// Thickness instance to compare. 
        /// trueif this Thickness instance has the same value
        /// and unit type as thickness. 
        public bool Equals(Thickness thickness)
        {
            return (this == thickness);
        } 

        ///  
        /// This function returns a hash code. 
        /// 
        /// Hash code 
        public override int GetHashCode()
        {
            return _Left.GetHashCode() ^ _Top.GetHashCode() ^ _Right.GetHashCode() ^ _Bottom.GetHashCode();
        } 

        ///  
        /// Converts this Thickness object to a string. 
        /// 
        /// String conversion. 
        public override string ToString()
        {
            return ThicknessConverter.ToString(this, CultureInfo.InvariantCulture);
        } 

        ///  
        /// Converts this Thickness object to a string. 
        /// 
        /// String conversion. 
        internal string ToString(CultureInfo cultureInfo)
        {
            return ThicknessConverter.ToString(this, cultureInfo);
        } 

        internal bool IsZero 
        { 
            get
            { 
                return      DoubleUtil.IsZero(Left)
                        &&  DoubleUtil.IsZero(Top)
                        &&  DoubleUtil.IsZero(Right)
                        &&  DoubleUtil.IsZero(Bottom); 
            }
        } 
 
        internal bool IsUniform
        { 
            get
            {
                return     DoubleUtil.AreClose(Left, Top)
                        && DoubleUtil.AreClose(Left, Right) 
                        && DoubleUtil.AreClose(Left, Bottom);
            } 
        } 

        ///  
        /// Verifies if this Thickness contains only valid values
        /// The set of validity checks is passed as parameters.
        /// 
        /// allows negative values 
        /// allows Double.NaN
        /// allows Double.PositiveInfinity 
        /// allows Double.NegativeInfinity 
        /// Whether or not the thickness complies to the range specified
        internal bool IsValid(bool allowNegative, bool allowNaN, bool allowPositiveInfinity, bool allowNegativeInfinity) 
        {
            if(!allowNegative)
            {
                if(Left < 0d || Right < 0d || Top < 0d || Bottom < 0d) 
                    return false;
            } 
 
            if(!allowNaN)
            { 
                if(DoubleUtil.IsNaN(Left) || DoubleUtil.IsNaN(Right) || DoubleUtil.IsNaN(Top) || DoubleUtil.IsNaN(Bottom))
                    return false;
            }
 
            if(!allowPositiveInfinity)
            { 
                if(Double.IsPositiveInfinity(Left) || Double.IsPositiveInfinity(Right) || Double.IsPositiveInfinity(Top) || Double.IsPositiveInfinity(Bottom)) 
                {
                    return false; 
                }
            }

            if(!allowNegativeInfinity) 
            {
                if(Double.IsNegativeInfinity(Left) || Double.IsNegativeInfinity(Right) || Double.IsNegativeInfinity(Top) || Double.IsNegativeInfinity(Bottom)) 
                { 
                    return false;
                } 
            }

            return true;
        } 

        ///  
        /// Compares two thicknesses for fuzzy equality.  This function 
        /// helps compensate for the fact that double values can
        /// acquire error when operated upon 
        /// 
        /// The thickness to compare to this
        /// Whether or not the two points are equal
        internal bool IsClose(Thickness thickness) 
        {
            return (    DoubleUtil.AreClose(Left, thickness.Left) 
                    &&  DoubleUtil.AreClose(Top, thickness.Top) 
                    &&  DoubleUtil.AreClose(Right, thickness.Right)
                    &&  DoubleUtil.AreClose(Bottom, thickness.Bottom)); 
        }

        /// 
        /// Compares two thicknesses for fuzzy equality.  This function 
        /// helps compensate for the fact that double values can
        /// acquire error when operated upon 
        ///  
        /// The first thickness to compare
        /// The second thickness to compare 
        /// Whether or not the two thicknesses are equal
        static internal bool AreClose(Thickness thickness0, Thickness thickness1)
        {
            return thickness0.IsClose(thickness1); 
        }
 
        #endregion 

 
        //--------------------------------------------------------------------
        //
        //  Public Operators
        // 
        //--------------------------------------------------------------------
 
        #region Public Operators 

        ///  
        /// Overloaded operator to compare two Thicknesses for equality.
        /// 
        /// first Thickness to compare
        /// second Thickness to compare 
        /// True if all sides of the Thickness are equal, false otherwise
        //  SEEALSO 
        public static bool operator==(Thickness t1, Thickness t2) 
        {
            return (    (t1._Left   == t2._Left   || (DoubleUtil.IsNaN(t1._Left)   && DoubleUtil.IsNaN(t2._Left))) 
                    &&  (t1._Top    == t2._Top    || (DoubleUtil.IsNaN(t1._Top)    && DoubleUtil.IsNaN(t2._Top)))
                    &&  (t1._Right  == t2._Right  || (DoubleUtil.IsNaN(t1._Right)  && DoubleUtil.IsNaN(t2._Right)))
                    &&  (t1._Bottom == t2._Bottom || (DoubleUtil.IsNaN(t1._Bottom) && DoubleUtil.IsNaN(t2._Bottom)))
                    ); 
        }
 
        ///  
        /// Overloaded operator to compare two Thicknesses for inequality.
        ///  
        /// first Thickness to compare
        /// second Thickness to compare
        /// False if all sides of the Thickness are equal, true otherwise
        //  SEEALSO 
        public static bool operator!=(Thickness t1, Thickness t2)
        { 
            return (!(t1 == t2)); 
        }
 
        #endregion


        //------------------------------------------------------------------- 
        //
        //  Public Properties 
        // 
        //--------------------------------------------------------------------
 
        #region Public Properties

        /// This property is the Length on the thickness' left side
        public double Left 
        {
            get { return _Left; } 
            set { _Left = value; } 
        }
 
        /// This property is the Length on the thickness' top side
        public double Top
        {
            get { return _Top; } 
            set { _Top = value; }
        } 
 
        /// This property is the Length on the thickness' right side
        public double Right 
        {
            get { return _Right; }
            set { _Right = value; }
        } 

        /// This property is the Length on the thickness' bottom side 
        public double Bottom 
        {
            get { return _Bottom; } 
            set { _Bottom = value; }
        }
        #endregion
 
        //-------------------------------------------------------------------
        // 
        //  INternal API 
        //
        //------------------------------------------------------------------- 

        #region Internal API

        internal Size Size 
        {
            get 
            { 
                return new Size(_Left + _Right, _Top + _Bottom);
            } 
        }

        #endregion
 
        //-------------------------------------------------------------------
        // 
        //  Private Fields 
        //
        //-------------------------------------------------------------------- 

        #region Private Fields

        private double _Left; 
        private double _Top;
        private double _Right; 
        private double _Bottom; 

        #endregion 
    }
}

// File provided for Reference Use Only by Microsoft Corporation (c) 2007.
// Copyright (c) Microsoft Corporation. All rights reserved.
//---------------------------------------------------------------------------- 
//
// Copyright (C) Microsoft Corporation.  All rights reserved.
//
// File: Thickness.cs 
//
// Description: Contains the Thickness (double x4) value type. 
// 
// History:
//  06/02/2003 : greglett  - created. 
//
//---------------------------------------------------------------------------

using MS.Internal; 
using System.ComponentModel;
using System.Globalization; 
 
namespace System.Windows
{ 
    /// 
    /// Thickness is a value type used to describe the thickness of frame around a rectangle.
    /// It contains four doubles each corresponding to a side: Left, Top, Right, Bottom.
    ///  
    [TypeConverter(typeof(ThicknessConverter))]
    [Localizability(LocalizationCategory.None, Readability = Readability.Unreadable)] 
    public struct Thickness : IEquatable 
    {
        //------------------------------------------------------------------- 
        //
        //  Constructors
        //
        //------------------------------------------------------------------- 

        #region Constructors 
        ///  
        /// This constructur builds a Thickness with a specified value on every side.
        ///  
        /// The specified uniform length.
        public Thickness(double uniformLength)
        {
            _Left = _Top = _Right = _Bottom = uniformLength; 
        }
 
        ///  
        /// This constructor builds a Thickness with the specified number of pixels on each side.
        ///  
        /// The thickness for the left side.
        /// The thickness for the top side.
        /// The thickness for the right side.
        /// The thickness for the bottom side. 
        public Thickness(double left, double top, double right, double bottom)
        { 
            _Left = left; 
            _Top = top;
            _Right = right; 
            _Bottom = bottom;
        }

 
        #endregion
 
 
        //--------------------------------------------------------------------
        // 
        //  Public Methods
        //
        //-------------------------------------------------------------------
 
        #region Public Methods
 
        ///  
        /// This function compares to the provided object for type and value equality.
        ///  
        /// Object to compare
        /// True if object is a Thickness and all sides of it are equal to this Thickness'.
        public override bool Equals(object obj)
        { 
            if (obj is Thickness)
            { 
                Thickness otherObj = (Thickness)obj; 
                return (this == otherObj);
            } 
            return (false);
        }

        ///  
        /// Compares this instance of Thickness with another instance.
        ///  
        /// Thickness instance to compare. 
        /// trueif this Thickness instance has the same value
        /// and unit type as thickness. 
        public bool Equals(Thickness thickness)
        {
            return (this == thickness);
        } 

        ///  
        /// This function returns a hash code. 
        /// 
        /// Hash code 
        public override int GetHashCode()
        {
            return _Left.GetHashCode() ^ _Top.GetHashCode() ^ _Right.GetHashCode() ^ _Bottom.GetHashCode();
        } 

        ///  
        /// Converts this Thickness object to a string. 
        /// 
        /// String conversion. 
        public override string ToString()
        {
            return ThicknessConverter.ToString(this, CultureInfo.InvariantCulture);
        } 

        ///  
        /// Converts this Thickness object to a string. 
        /// 
        /// String conversion. 
        internal string ToString(CultureInfo cultureInfo)
        {
            return ThicknessConverter.ToString(this, cultureInfo);
        } 

        internal bool IsZero 
        { 
            get
            { 
                return      DoubleUtil.IsZero(Left)
                        &&  DoubleUtil.IsZero(Top)
                        &&  DoubleUtil.IsZero(Right)
                        &&  DoubleUtil.IsZero(Bottom); 
            }
        } 
 
        internal bool IsUniform
        { 
            get
            {
                return     DoubleUtil.AreClose(Left, Top)
                        && DoubleUtil.AreClose(Left, Right) 
                        && DoubleUtil.AreClose(Left, Bottom);
            } 
        } 

        ///  
        /// Verifies if this Thickness contains only valid values
        /// The set of validity checks is passed as parameters.
        /// 
        /// allows negative values 
        /// allows Double.NaN
        /// allows Double.PositiveInfinity 
        /// allows Double.NegativeInfinity 
        /// Whether or not the thickness complies to the range specified
        internal bool IsValid(bool allowNegative, bool allowNaN, bool allowPositiveInfinity, bool allowNegativeInfinity) 
        {
            if(!allowNegative)
            {
                if(Left < 0d || Right < 0d || Top < 0d || Bottom < 0d) 
                    return false;
            } 
 
            if(!allowNaN)
            { 
                if(DoubleUtil.IsNaN(Left) || DoubleUtil.IsNaN(Right) || DoubleUtil.IsNaN(Top) || DoubleUtil.IsNaN(Bottom))
                    return false;
            }
 
            if(!allowPositiveInfinity)
            { 
                if(Double.IsPositiveInfinity(Left) || Double.IsPositiveInfinity(Right) || Double.IsPositiveInfinity(Top) || Double.IsPositiveInfinity(Bottom)) 
                {
                    return false; 
                }
            }

            if(!allowNegativeInfinity) 
            {
                if(Double.IsNegativeInfinity(Left) || Double.IsNegativeInfinity(Right) || Double.IsNegativeInfinity(Top) || Double.IsNegativeInfinity(Bottom)) 
                { 
                    return false;
                } 
            }

            return true;
        } 

        ///  
        /// Compares two thicknesses for fuzzy equality.  This function 
        /// helps compensate for the fact that double values can
        /// acquire error when operated upon 
        /// 
        /// The thickness to compare to this
        /// Whether or not the two points are equal
        internal bool IsClose(Thickness thickness) 
        {
            return (    DoubleUtil.AreClose(Left, thickness.Left) 
                    &&  DoubleUtil.AreClose(Top, thickness.Top) 
                    &&  DoubleUtil.AreClose(Right, thickness.Right)
                    &&  DoubleUtil.AreClose(Bottom, thickness.Bottom)); 
        }

        /// 
        /// Compares two thicknesses for fuzzy equality.  This function 
        /// helps compensate for the fact that double values can
        /// acquire error when operated upon 
        ///  
        /// The first thickness to compare
        /// The second thickness to compare 
        /// Whether or not the two thicknesses are equal
        static internal bool AreClose(Thickness thickness0, Thickness thickness1)
        {
            return thickness0.IsClose(thickness1); 
        }
 
        #endregion 

 
        //--------------------------------------------------------------------
        //
        //  Public Operators
        // 
        //--------------------------------------------------------------------
 
        #region Public Operators 

        ///  
        /// Overloaded operator to compare two Thicknesses for equality.
        /// 
        /// first Thickness to compare
        /// second Thickness to compare 
        /// True if all sides of the Thickness are equal, false otherwise
        //  SEEALSO 
        public static bool operator==(Thickness t1, Thickness t2) 
        {
            return (    (t1._Left   == t2._Left   || (DoubleUtil.IsNaN(t1._Left)   && DoubleUtil.IsNaN(t2._Left))) 
                    &&  (t1._Top    == t2._Top    || (DoubleUtil.IsNaN(t1._Top)    && DoubleUtil.IsNaN(t2._Top)))
                    &&  (t1._Right  == t2._Right  || (DoubleUtil.IsNaN(t1._Right)  && DoubleUtil.IsNaN(t2._Right)))
                    &&  (t1._Bottom == t2._Bottom || (DoubleUtil.IsNaN(t1._Bottom) && DoubleUtil.IsNaN(t2._Bottom)))
                    ); 
        }
 
        ///  
        /// Overloaded operator to compare two Thicknesses for inequality.
        ///  
        /// first Thickness to compare
        /// second Thickness to compare
        /// False if all sides of the Thickness are equal, true otherwise
        //  SEEALSO 
        public static bool operator!=(Thickness t1, Thickness t2)
        { 
            return (!(t1 == t2)); 
        }
 
        #endregion


        //------------------------------------------------------------------- 
        //
        //  Public Properties 
        // 
        //--------------------------------------------------------------------
 
        #region Public Properties

        /// This property is the Length on the thickness' left side
        public double Left 
        {
            get { return _Left; } 
            set { _Left = value; } 
        }
 
        /// This property is the Length on the thickness' top side
        public double Top
        {
            get { return _Top; } 
            set { _Top = value; }
        } 
 
        /// This property is the Length on the thickness' right side
        public double Right 
        {
            get { return _Right; }
            set { _Right = value; }
        } 

        /// This property is the Length on the thickness' bottom side 
        public double Bottom 
        {
            get { return _Bottom; } 
            set { _Bottom = value; }
        }
        #endregion
 
        //-------------------------------------------------------------------
        // 
        //  INternal API 
        //
        //------------------------------------------------------------------- 

        #region Internal API

        internal Size Size 
        {
            get 
            { 
                return new Size(_Left + _Right, _Top + _Bottom);
            } 
        }

        #endregion
 
        //-------------------------------------------------------------------
        // 
        //  Private Fields 
        //
        //-------------------------------------------------------------------- 

        #region Private Fields

        private double _Left; 
        private double _Top;
        private double _Right; 
        private double _Bottom; 

        #endregion 
    }
}

// File provided for Reference Use Only by Microsoft Corporation (c) 2007.
// Copyright (c) Microsoft Corporation. All rights reserved.

Link Menu

Network programming in C#, Network Programming in VB.NET, Network Programming in .NET
This book is available now!
Buy at Amazon US or
Buy at Amazon UK